Rauland Communications WCD256W 2.5″ 6-digit White LED Wireless Digital Clock

The WCXRVRNTP NTP Receiver provides the WCXATRAN Wireless Transmitter with a time synchronization signal. Using only a LAN or internet connection to an NTP timeserver, the WCXRVRNTP Receiver and WCXATRAN Transmitter keep all Rauland wireless clocks and Telecenter Systems on exactly the same time.
The WCXRVRNTP connects to your data network in minutes, with no receiver antenna required. Typical installation time measured in minutes, not hours.

Any IP-based network address running an NTP timeserver can be used as the local time source. This feature allows the WCXRVRNTP to acquire time synchronization from either a local area network (LAN) or from an atomic clock via the internet. The WCXRVRNTP has front panel indicators for power and status. It also has three network link LEDs on the rear panel to indicate connection, reception and transmission to a local area network or to the internet. Standard RJ45 jacks on the WCXRVRNTP allow the use of off the shelf LAN patch cables.