0
An empty cart
You have no item in your shopping cart
Crestron Control Systems – C2N-TAMFMXM
- Provides discrete AM/FM and XM® tuners in one box [1]
- Enables interactive control using touch screens and mobile devices [2]
- Support for metadata enables display of station names, song titles, artists, and other details [3]
- Onboard user preset capability
- Includes independent analog and digital audio outputs [4]
- Native Crestron® system integration via Cresnet®
- Easy setup from front panel or software
The C2N-TAMFMXM provides one AM/FM tuner and one XM® Satellite Radio tuner[1] for use with a Crestron® multiroom audio system. Discrete audio outputs are provided for each tuner allowing both tuners to be operated independently and simultaneously. The AM/FM tuner features a stereo analog output, while the XM tuner features both analog and SPDIF digital outputs. Control of each tuner is available through the LCD front panel, as well as from Crestron touch screens, computers, and mobile devices via a Crestron control system.
The C2N-TAMFMXM is an ideal companion to theC2N-AMP-4X100 4 Room Audio System, C2N-AMP-6X100 6 Room + 2 Audio System, or Sonnex® Multiroom Audio System (SWAMP-24X8). Multiple tuners can be installed to accommodate any number of listening zones, allowing listeners in each room to enjoy their choice of music, news, talk, or sports.
| AM Tuner | |
| Frequency Range | 530 to 1710 kHz (9 or 10 kHz steps) |
| Sensitivity | 3.5 µV (RF input level 10 dB S+N/N) |
| Selectivity | 10 kHz |
| Alternate Channel Selectivity | 55 dB |
| Image Rejection | 35 dB |
| IF Rejection | 60 dB |
| FM Tuner | |
| Frequency Range | 87.50 to 108 MHz (50 or 100 kHz steps) |
| Usable Sensitivity | 11 dBf mono; 60 dBf stereo |
| S/N Ratio | 64 dB @ 65 dBf mono; 56 dB @ 65 dBf stereo |
| IF Rejection | 100 dB |
| AM Rejection | 55 dB |
| Stereo Separation | 27 dB |
| XM Tuner (analog) | |
| THD+N | <0.01% @ 1 kHz |
| S/N Ratio | >97 dB balanced, >95 dB unbalanced, 20 Hz – 22 kHz A-weighted |
| Crosstalk | >-90 dB 20 Hz – 22 kHz |
| Connectors | |
| AM-FM AUDIO OUT L,R | (2) RCA female; AM/FM tuner unbalanced stereo line-level audio output |
| XM AUDIO OUT L,R | (2) RCA female; XM tuner unbalanced stereo line-level audio output |
| XM AUDIO OUT SPDIF | (1) RCA female; XM tuner S/PDIF coaxial digital audio output |
| FM ANTENNA | (1) IEC 169-2 coaxial (IEC-to-F adapter included); FM wire antenna included; Impedance: 75 Ohms |
| AM ANTENNA | (1) 2-pin spring-loaded terminal; AM shielded loop antenna included; Impedance: 50 Ohms |
| XM ANTENNA | (1) F-type coaxial (F-to-SMB adapter included); Indoor/outdoor high-gain antenna w/20 ft cable included; Available Power: 200 mA @ 5 Volts DC |
| NET | (2) 4-pin 3.5 mm detachable terminal blocks; Cresnet slave ports, paralleled; Connect to Cresnet control network |
| 24 VDC 2A | (1) 2.1 x 5.5 mm DC power connector; 24 Volt DC power input (PW-2420RU power pack included) |
| G | (1) 6-32 screw, chassis ground lug |
| Display | |
| Green LCD alphanumeric, 2 lines x 20 characters per line; Displays setup and control menus, and channel and content information | |
| Controls & Indicators | |
| AM, FM, XM | (3) Pushbuttons, select which tuner band to control |
| DISP | (1) Pushbutton, press to display channel and content information |
| MENU | (1) Pushbutton, press to display a list of menu options |
| Λ,V | (2) Pushbuttons, used to navigate the menu and select channels |
| ENTER | (1) Pushbutton, press to execute a menu item |
| NET | (1) Amber LED, indicates communication with the Cresnet system |
| RESET | (1) Recessed pushbutton for hardware reset |
| Power | |
| Power Pack | 2 Amps @ 24 Volts DC; 100-240 Volts AC, 50/60 Hz power pack, model PW-2420RU included |
| Cresnet Power Usage | none |
| XM Antenna Power | 200 mA @ 5 Volts DC |
| Environmental | |
| Temperature | 32° to 113° F (0° to 45° C) |
| Humidity | 10% to 90% RH (non-condensing) |
| Heat Dissipation | 27 BTU/hr |
| Enclosure | |
| Chassis | Aluminum w/polycarbonate label overlay |
| Front Panel | Plastic, black with polycarbonate label overlay |
| Dimensions | |
| Height | 2.36 in (60 mm) with feet |
| Width | 8.12 in (206 mm) |
| Depth | 5.93 in (151 mm) |
| Weight | |
| 4.30 lb (1.95 kg) | |
FOR CURRENT PRICING OR TO PLACE AN ORDER PLEASE CONTACT OUR KNOWLEDGEABLE AND PROFESSIONAL CUSTOMER SERVICE TEAM:
- PHONE: 419-661-0678
CLICK TO SUBMIT AN ITEMIZED RFQ
Click for a Quick Quote
IF YOU CAN'T FIND WHAT YOU NEED OR REQUIRE A CUSTOM PART SIMPLY CALL AND SPEAK TO ONE OF OUR KNOWLEDGEABLE FLUID CONNECTION SPECIALISTS. THEY CAN WALK YOU THROUGH THEORDERING PROCESS QUICKLY AND PROFESSIONALLY.
